Hyundai Sonata: Power Window Relay. Repair procedures
Inspection
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the junction box.
|
3. |
Check for continuity between the terminals.
|
4. |
There should be continuity between the No.1 in the I/P-C and No.26(or
39) terminal in the I/P-A when power and ground are connected to the
No.1 terminal in the I/P-C and ground.
|
5. |
There should be no continuity between the No.1 terminal in the
I/P-C and No.26(or 39) terminal in the I/P-A when power is disconnected.
[Front]
[Rear]
|
Power Window Switch. Repair procedures
Inspection Power Window Main Switch Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the front door trim panel. ...See also:
Cup holder
WARNING - Hot liquids
Do not place uncovered cups of hot liquid in the cup holder while the
vehicle is in motion. If the hot liquid spills, you may burn yourself. Such
a burn to the driver c ...
Ignition switch position
LOCK
Without the immobilizer
The steering wheel locks to protect against theft. The ignition key can be removed
only in the LOCK position. When turning the ignition switch to the LOCK position ...
Positive Crankcase Ventilation (PCV) Valve. Description and Operation
Operation Principle
...