Hyundai Sonata: Preparation Of Tools And Measuring Equipment
Be sure that all necessary tools and measuring equipment
are available starting work.
Special Tools
Use special tools when they are required.
Removal Of Parts
First find the cause of the problem and then determine whether
removal or disassembly before starting the job.
Disassembly
If the disassembly procedure is complex, requiring many parts
to be disassembled, all parts should be disassembled in a way that will not
affect their performance or external appearance.
| 1. |
Inspection of parts
Each part, when removed, should be carefully on suspected
for malfunction, deformation, damage, and other problems.
|
| 2. |
Arrangement of parts
All disassembled parts should be carefully arranged
for effective reassembly.
Be sure to separate and correctly identify the parts
to be replaced from those that will be used again.
|
| 3. |
Cleaning parts for reuse
All parts to be used again should be carefully and
thoroughly cleaned by an appropriate method.
|
General Service Information
Protection Of The Vehicle
Always be sure to cover fenders, seats, and floor areas before
starting work.
The support rod ...
Parts
When replacing parts, use HYUNDAI genuine parts.
Replacement
Standard values, such as torques and certain adjustments, must be strictly observed in the reassembly of all parts.
If removed, the ...
See also:
Driving in the rain
Rain and wet roads can make driving dangerous, especially if you’re not prepared
for the slick pavement. Here are a few things to consider when driving in the rain:
A heavy rainfall will make ...
Rear Disc Brake. Components and Components Location
Components
1. Guide rod bolt
2. Bleed screw
3. Caliper bracket
4. Caliper body
5. Inner pad shim
6. Brake pad
7. Pad retainer
...
Operating door locks from outside the vehicle
Turn the key toward the rear of the vehicle to unlock and toward the front
of the vehicle to lock.
If you lock the door with a key, all vehicle doors will lock automatically.
From the driv ...
