Purge Control Solenoid Valve (PCSV) is installed on the surge tank and controls the passage between the canister and the intake manifold. It is a solenoid valve and is open when the ECM grounds the valve control line. When the passage is open (PCSV ON), fuel vapor stored in the canister is transferred to the intake manifold.

Injector. Repair procedures

Inspection 1. Turn the ignition switch OFF. 2. Disconnect the injector connector. 3. Measure resistance betwee ...

Purge Control Solenoid Valve (PCSV). Specifications

Specification Item Specification Coil Resistance (Ω) 19.0 ~ 22.0 [20°C(68°F)] ...

See also:

Front Strut Assembly. Components and Components Location
Components 1. Insulator cap 2. Insulator assembly 3. Strut bearing 4. Spring upper seat 5. Spring upper pad 6. Coil spring 7. Spring lower pad 8. Dust ...

Steering Angle Sensor. Description and Operation
Description The Steering Angle Sensor (SAS) is installed in EPS (Electric Power Steering) and it sends messages to HECU through CAN communication line. The SAS is used to determine turning ...

Purge Control Solenoid Valve (PCSV). Schematic Diagrams
Circuit Diagram ...