Coolant. Repair procedures

Refilling And Bleeding Never remove the radiator cap when the engine is hot. Serious scalding could be caused by hot fluid und ...

Radiator. Repair procedures

Removal and Installation 1. Disconnect the battery terminals. (Refer to Engine and transaxle assembly in this group) 2. Remove the air ...

See also:

Ventilation
1. Set the mode to the position. 2. Set the air intake control to the outside (fresh) air position. 3. Set the temperature control to the desired position. 4. Set the fan speed control to the desi ...

Front Stabilizer Bar. Repair procedures - Revised
Replacement 1. Remove the front wheel & tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) ...

Vehicle break-in process
No special break-in period is needed. By following a few simple precautions for the first 600 miles (1,000 km) you may add to the performance, economy and life of your vehicle. Do not race the ...