Hyundai Sonata: Rear Assist Arm. Repair procedures - Rear Suspension System - Suspension SystemHyundai Sonata: Rear Assist Arm. Repair procedures

Replacement

1.
Remove the rear wheel & tire.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
Be careful not to damage to the hub bolts when removing the rear wheel & tire.
2.
Remove the split pin and castle nut and then disconnect the rear assist arm (A) from the rear axle.
Tightening torque:
78.5 ~ 88.3 N.m (8.0 ~ 9.0 kgf.m, 57.9 ~ 65.1 lb-ft)

3.
Loosen the bolt & nut and then remove the rear assist arm (A) with the sub frame.
Tightening torque:
107.9 ~ 117.7 N.m (11.0 ~ 12.0 kgf.m, 79.6 ~ 86.8 lb-ft)

4.
Installation is the reverse of removal.
5.
Check the alignment.
(Refer to 'Tires/Wheels - alingment')

Inspection

1.
Check the bushing for wear and deterioration.
2.
Check for all bolts and nut.

    Rear Stabilizer Bar. Repair procedures
    Replacement 1. Remove the rear wheel & tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) ...

    Trailing Arm. Repair procedures
    Replacement 1. Remove the rear wheel & tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) ...

    See also:

    Seat Belt Pretensioner (BPT). Repair procedures
    Removal 1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work. 2. Using a flat-tip screwdr ...

    Engine Control Module (ECM). Schematic Diagrams
    ECM Terminal And Input/Output signal ECM Terminal Function Connector [CHG-AG] Pin No. Description Connected to 1 I ...

    Canister Close Valve (CCV). Specifications
    Specification Item Specification Coil Resistance (Ω) 19.9 ~ 22.9 [20°C(68°F) ...