Hyundai Sonata: Rear Bumper. Repair procedures
Replacement
|
1. |
Remove the following items.
|
2. |
Remove the rear combination lamp cover (A).
|
3. |
Disconnect the connector (A), and then remove the rear combination
lamp mounting nuts.
|
4. |
Remove the rear combination lamp.
|
5. |
After loosening the rear bumper side's mounting clip and screws,
then disconnect the side's.
|
6. |
Remove the mounting bolts.
|
7. |
Disconnect the connector (A).
|
8. |
Loosen the rear bumper cover mounting clips, and then remove the
rear bumper cover (A).
|
9. |
Installation is the reverse of removal.
|
Rear Bumper. Components and Components Location
Components 1. Rear bumper cover 2. Energy up sober 3. Rear bumper side bracket ...See also:
Repair procedures
Inspection
Front Door Lock Actuator Inspection
1.
Remove the front door trim.
(Refer to the BD group - "Front door")
2.
R ...
Troubleshooting
Troubleshooting
1.
The lamp switch inputs can be checked using the GDS.
2.
To check the input value of lamp switch, select option "Body Co ...
Front Washer Motor. Repair procedures
Inspection
1.
With the washer motor connected to the reservoir tank, fill the
reservoir tank with water.
...