Hyundai Sonata: Rear combination lamp. Repair procedures
Removal
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the rear combination lamp cover (A).
|
3. |
Remove the rear combination lamp after loosening the mounting
nuts (4EA) and disconnecting the connector (A).
|
4. |
If necessary to remove the bulb, remove the bulb after removing
rear combination cover.
[Tail Lamp / Stop Lamp]
[Turn Signal Lamp]
[Tail Lamp]
|
5. |
Remove the trunk lid trim.
(Refer to the BD group - "Trunk")
|
6. |
Remove the trunk lid lamp assembly (A) after loosening the mounting
nuts (3EA) and disconnecting the connector.
|
7. |
Replace the bulb after removing the trunk lid lamp assembly.
[Tail Lamp]
[Back Up Lamp]
|
Installation
1. |
Install the trunk lid lamp assembly.
|
2. |
Install the rear combination lamp.
|
High Mounted stop lamp. Repair procedures
Removal 1. Disconnect the negative(-) battery terminal. 2. Remove the rear seat. (Refer to the BD group - "Rear seat") ...Troubleshooting
Troubleshooting 1. The lamp switch inputs can be checked using the GDS. 2. To check the input value of lamp switch, select option "Body Co ...See also:
Repair procedures
Service Adjustment Procedure
Oil level Check
A check of ATF level is not normally required during
scheduled ...
Do not use methanol
Fuels containing methanol (wood alcohol) should not be used in your vehicle.
This type of fuel can reduce vehicle performance and damage components of the fuel
system.
CAUTION
Your New Vehicle L ...
Knock Sensor (KS). Specifications
Specification
Item
Specification
Capacitance (pF)
850 ~ 1,150
...