Hyundai Sonata: Rear Glass Defogger Switch. Repair procedures
Inspection
| 1. |
The rear glass defogger switch inputs can be checked using the
GDS.
|
| 2. |
To check the input value of rear glass defogger switch, select
option "Body Control Module".
|
| 3. |
To consult the present input/output value of BCM, "Current DATA".
It provides information of BCM input/output conditions of rear defogger
relay.
|
| 4. |
To check the input value of rear glass defogger switch in force
mode, select option "Actuation Test of smart junction box".
|
Removal
| 1. |
Disconnect the negative(-) battery terminal.
|
| 2. |
Remove the center fascia panel (A) after loosening the mounting
screws.
|
| 3. |
Disconnect the heater control unit connector (A) and hose (B).
|
| 4. |
Remove the heater control unit contained the rear glass defogger
switch from the center fascia panel.
|
Installation
| 1. |
Install the heater control unit.
|
| 2. |
Install the center fascia panel.
|
| 3. |
Install the crash pad garnish.
|
Rear Glass Defogger Printed Heater. Repair procedures
Inspection
Wrap tin foil around the end of the voltmeter test lead to prevent
damaging the heater line. Apply finger pressure ...
See also:
Front Door. Repair procedures
Replacements
Door Trim Replacement
•
Be careful not to scratch the door trim and other parts.
...
Automatic climate control system
To defog inside windshield
1. Select desired fan speed.
2. Select desired temperature.
3. Press the defrost button ().
4. The outside (fresh) air position will be selected automatically.
If the ...
Checking the amount of air conditioner refrigerant and compressor lubricant
When the amount of refrigerant is low, the performance of the air conditioning
is reduced. Overfilling also has a negative influence on the air conditioning system.
Therefore, if abnormal operation ...
