Hyundai Sonata: Rear Seat. Repair procedures - Seat & Power Seat - Body (Interior and Exterior)Hyundai Sonata: Rear Seat. Repair procedures

Replacement

Seat Assembly Replacement
1.
After loosening the mounting bolts, then remove the rear seat assembly (A).
Tightening torque :
44.1 ~ 58.8 N.m (4.5 ~ 6.0 kgf.m, 32.5 ~ 43.4 lb-ft)

2.
Disconnect the seat heater connectors (A).
3.
Installation is the reverse of removal.
Seat mounting bolt and nut installation procedure.
•
Tighten temporarily in the order of nut and bolt on the front of recliner hinge installation part.
•
After completely tightening completely the bolt on the back of the recliner hinge installaion part, tighten the bolt on the front of it completely.
•
Setting down the seat cushion, tighten the mounting bolt of the cushion frame hinge.
•
Check if reclining the seat and folding seat back operate smoothly.
Armrest Replacement
1.
After loosening the mounting nuts, then remove the armrest(A).
2.
Installation is the reverse of removal.

    Rear Seat. Components and Components Location
    Components 1. Rear seat back 2. Rear seat cushion 3. Armrest ...

    Seat Belt
    ...

    See also:

    Intake Air Temperature Sensor (IATS). Repair procedures
    Inspection 1. Turn the ignition switch OFF. 2. Disconnect the IATS connector. 3. Measure resistance between th ...

    Auto up/down window
    Pressing or pulling up the power window switch momentarily to the second detent position (6) completely lowers or lifts the window even when the switch is released. To stop the window at the des ...

    Road warning
    Hazard warning flasher The hazard warning flasher serves as a warning to other drivers to exercise extreme caution when approaching, overtaking, or passing your vehicle. It should be used when ...