Hyundai Sonata: Rear Shock Absorber. Repair procedures
Replacement
1. |
Remove the rear wheel & tire.
|
2. |
Loosen the bolt & nut and then disconnect the shock absorber (A)
with the rear axle.
|
3. |
Loosen the shock absorber mounting bolts (A).
|
4. |
Installation is the reverse of removal.
|
Inspection
1. |
Check the rubber parts for wear and deterioration.
|
2. |
Compress and extend the piston rod (A) and check that there is
no abnormal resistance or unusual sound during operation.
|
Rear Shock Absorber. Components and Components Location
Components 1. Self locking nut 2. Bracket assembly 3. Bumper rubber 4. Dust cover 5. Shock absorber ...Rear Upper Arm. Repair procedures
Removal 1. Remove the rear wheel & tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) ...See also:
Starting the engine
WARNING
Always wear appropriate shoes when operating your vehicle. Unsuitable shoes
(high heels, ski boots,etc.) may interfere with your ability to use the brake, accelerator
pedal, and clutch (i ...
Panoramaroof. Repair procedures
Replacements
Glass Replacement
1.
Remove the cover (A).
2.
After loosening the mounting screws, then remove the movable glass
...
Crash Pad. Repair procedures
Replacement
Cluster Replacement
•
When prying with a flat-tip screwdriver, wrap it with
...