Hyundai Sonata: Repair procedures
Inspection
Check it by the procedure below to see if the function of the ECM is normal.
1. |
Turn the ignition key to the "ON" position.
|
2. |
Cover the front sensor to stop functioning.
|
3. |
Shine a light at the rear sensor.
|
4. |
The ECM should be darkened as soon as the rear sensor detects
the light.
|
5. |
When the reverse gear is engaged, the ECM should not be darkened.
|
6. |
When heading lights to both the front and rear sensors, the ECM
should not be darkened.
|
Removal
1. |
Remove the mirror wiring cover (A).
|
2. |
Disconnect the mirror connector (B) and remove the mounting screw
(A).
|
3. |
Slide the inside rear view mirror rearward to remove the inside
rear view mirror assembly (A).
|
Installation
1. |
Install the mirror assembly.
|
2. |
Install the mirror wiring cover and connector.
|
Description and Operation
Description The ECM (Electro Chromatic inside rear view Mirror) is for dimming the reflecting light from a vehicle behind at night, Preventing glare from the light. The forward facing sensor ...Compass Mirror. Description and Operation
Function 1. Push the A button lower of the rear view mirror to turn on the function of the compass mirror so that displays a sign of a direction on the small board in ...See also:
Camshaft Position Sensor (CMPS). Description and Operation
Description
Camshaft Position Sensor (CMPS) is a hall sensor and detects the camshaft
position by using a hall element.
It is related with Crankshaft Position Sensor (CKPS) and detects the ...
Specifications
Specifications
Hood
Type
Rear hinged, gas lifter type
Front Door
Construction
Front hinged, frame door construction
...
Injector. Schematic Diagrams
Circuit Diagram
...