Hyundai Sonata: Repair procedures
Inspection
1. |
After disconnecting the vapor hose from the PCV valve, remove
the PCV valve.
|
2. |
Reconnect the PCV valve to the vapor hose.
|
3. |
Run the engine at idle, then put a finger over the open end of
the PCV valve and make sure that intake manifold vacuum can be felt.
|
4. |
If the vacuum is not felt inspect PCV operation, if operating
correctly clean or replace the vapor hose.
|
Schematic Diagrams
Schematic Diagram ...Positive Crankcase Ventilation (PCV) Valve. Description and Operation
Operation Principle ...See also:
Storage compartments
These compartments can be used to store small items.
CAUTION
To avoid possible theft, do not leave valuables in the storage compartments.
Always keep the storage compartment covers closed while ...
Brake Line. Repair procedures
Removal
1.
Disconnect the brake fiuid level switch connector, and remove
the reservoir cap.
2.
Remove the brake fluid from the master cyli ...
Front Wheel Speed Sensor. Repair procedures
Removal
1.
Remove the front wheel and tire.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
...