Hyundai Sonata: Room Lamp. Repair procedures
Inspection
1. |
Check that the switch operates properly after disconnecting the
room lamp connector (A).
|
Removal
1. |
Disconnect the negative(-) battery terminal.
|
2. |
Carefully remove the lens (A) using a small screwdriver.
|
3. |
Remove the bulb.
|
4. |
Remove the room lamp after loosening the mounting screws.
|
5. |
Remove the room lamp assembly (A) from the head lining after disconnecting
the connector.
|
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the vanity lamp (A) prying out with a small screwdriver.
|
3. |
Remove the vanity lamp assembly after disconnecting the connector
(A).
|
Installation
1. |
Reconnect the connector.
|
2. |
Install the room lamp assembly.
|
3. |
Install the len.
|
1. |
Reconnect the vanity lamp connector.
|
2. |
Install the vanity lamp.
|
Head Lamps. Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the front bumper. (Refer to the BD group - "Front bumper") ...Overhead Console Lamp. Schematic Diagrams
Circuit Diagram ...See also:
Clutch Pedal. Repair procedures
Removal
Do not spill brake fluid on the vehicle; it may damage the paint
if brake fluid does contact the paint, wash it off im ...
Driving at night
Because night driving presents more hazards than driving in the daylight, here
are some important tips to remember:
• Slow down and keep more distance between you and other vehicles, as it ma ...
Windows
(1) Driver’s door power window switch
(2) Front passenger’s door power window switch
(3) Rear door (left) power window switch
(4) Rear door (right) power window switch
(5) Window opening and ...