Hyundai Sonata: Seat Heater. Repair procedures - Seat Electrical - Body Electrical SystemHyundai Sonata: Seat Heater. Repair procedures

Inspection

First Seat Heater
1.
Check for continuity and measure the resistance between terminals.
[Cushion]

[Back]

Standard value (Fabric / Leather)
Cushion : 4.77 Ω ± 10%
Back 4.30 Ω ± 10% / 4.13 Ω ± 10%
Set : 9.07 Ω ± 10% / 8.9 Ω ± 10%
2.
Operate the seat heater after connecting the connector, and then check the thermostat by measuring the temperature of seat surface.
Standard value (Fabric / Leather)
Cushion : 40 ± 2°C (104 ± 35.6°F)
Back : 46 ± 2°C (114.8 ± 35.6°F)
3.
Check for continuity between the terminals after disconnecting the connector.
2nd Seat Heater
1.
Check for continuity and measure the resistance between No.1 and NO.3 terminals.

Standard value (Bench / Split)
Cushion : 1.53 Ω ± 10% / 4.05 Ω ± 10%
Back : 1.35 Ω ± 10%
Set : 2.88 Ω ± 10%
2.
Operate the seat warmer after connecting the 3P connector, and then check the thermostat by measuring the temperature of seat surface.
Standard value (Bench / Split)
Cushion : 40º ± 2°C / 40º ± 2°C (104 ± 35.6°F)
Back : 46º ± 2°C (114.8 ± 35.6°F)

    Seat Heater. Schematic Diagrams
    Circuit Diagram ...

    See also:

    Stowing the rear seat belt
    The rear seat belt buckles can be stowed in the pocket between the rear seatback and cushion when not in use. ...

    Front Body. Body Repair
    Front Body A Front Body B Front Body C ...

    Seat Belt Buckle Switch (BS). Components and Components Location
    Components ...