Hyundai Sonata: Seat Heater Switch. Repair procedures
Inspection
Front Seat Heater Switch
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the floor console upper cover (A).
|
3. |
Disconnect the multimedia jack connector (A) from the floor console
upper cover.
|
4. |
Remove the seat heater switch connectors from the floor console
upper cover (A).
|
5. |
Operate each seat heater switch and check that continuity exists
between the terminals.
If there is no continuity, replace the seat heater switch
|
Rear Seat Heater Switch
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the rear door trim.
(Refer to the BD group - "Rear door")
|
3. |
Turn rear seat heater switch ON and check that continuity exists
between the terminals.
If there is no continuity, replace the seat heater switch.
|
Installation
1. |
Install the seat heater switch.
|
2. |
Install the console upper cover.
|
3. |
Install the shift lever knob.
|
Seat Heater Switch. Schematic Diagrams
Circuit Diagram ...Seat Heater. Components and Components Location
Component Location ...See also:
Rail Pressure Sensor (RPS). Description and Operation
Description
Rail Pressure Sensor (RPS) is installed on the delivery pipe and measures
the instantaneous fuel pressure in the delivery pipe. The sensing element (Semiconductor
element) built ...
Weight Classification System (WCS). Components and Components Location
Components
...
Console. Components and Components Location
Components
1. Console assembly
2. Console upper cover
3. Extension side cover
4. Crash pad garnish
...