Hyundai Sonata: Smart key. Repair procedures - Smart key System - Body Electrical SystemHyundai Sonata: Smart key. Repair procedures

Smart Key

Smart Key Code Saving
1.
Connect the DLC cable of GDS to the data link connector in driver side crash pad lower panel, turn the power on GDS.

2.
Select the vehicle model and then do "Smart key code saving".

3.
After selecting "Smart key teaching" menu, push "Enter" key, then the screen will be shown as below.

4.
After inserting the teaching key, push "ENTER" key.
5.
Input the "Pin code" for first key teaching.

6.
Confirm the message "First key teaching completed".

7.
Input the "Pin code" for second key teaching.

8.
Confirm the message "Second key teaching completed".

9.
Then the screen will be shown as below when key teaching process is completed.

    Repair procedures
    Inspection Self Diagnosis With GDS Smart key system defects can be quickly diagnosed with the GDS. GDS operates actuator quickly to monitor, input/output value and self diagnosis. The f ...

    Smart key unit. Components and Components Location
    Component (1) Connector Pin Information Pin Connector A Pin Connector B 1 Battery 1 Interior 2 an ...

    See also:

    MENU : My Music Mode
    In My Music mode, press the key to set the Repeat, Random, Information, Delete, Delete All, and Delete Selection features. Repeat Press the key ► Set [ RPT] through the TUNE knob or ...

    Muffler. Repair procedures
    Removal and Installation 1. Remove the front muffler (B) after disconnecting the oxygen sensor connector (A) (ULEV only). Tightening torque: ...

    Good driving practices
    Never take the vehicle out of gear and coast down a hill. This is extremely hazardous. Always leave the vehicle in gear. Do not "ride" the brakes. This can cause them to overheat and ...