Hyundai Sonata: Specifications - General Information - Driveshaft and axleHyundai Sonata: Specifications

Specification

Engine
 T/M
 Joint type
 Max. permissible angle
Outer
 Inner
 Outer
 Inner
Gasoline 2.0
 M/T
 BJ#95
 TJ#95
 43°
 21°
A/T
 BJ#95
 TJ#95
 43°
 21°
Gasoline 2.4
 M/T
 BJ#95
 TJ#95
 43°
 21°
A/T
 BJ#95
 TJ#95
 43°
 21°

Tightening Torque
Item
 N.m
 kgf.m
 Ib.ft
Front
 Wheel nut
 88.2 ~ 107.8
 9.0 ~ 11.0
 65.0 ~ 79.5
Drive shaft castle nut
 215.7 ~ 254.9
 22.0 ~ 26.0
 159.1 ~ 188.0
Strut assembly lower mounting bolt
 137.2 ~ 156.9
 14.0 ~ 16.0
 101.2 ~ 115.7
Brake caliper mounting bolt
 78.4 ~ 98.0
 8.0 ~ 10.0
 57.8 ~ 72.3
Wheel speed sensor mounting bolt
 6.8 ~ 10.7
 0.7 ~ 1.1
 5.0 ~ 7.9
Brake disc mounting bolt
 4.9 ~ 5.8
 0.5 ~ 0.6
 3.6 ~ 4.3
Lower ball joint mounting bolt
 98.0 ~ 117.6
 10.0 ~ 12.0
 72.3 ~ 86.7
Tie rod end ball joint nut
 34.3 ~ 44.0
 3.5 ~ 4.5
 25.3 ~ 32.5
Rear
 Wheel nut
 88.2 ~ 107.8
 9.0 ~ 11.0
 65.0 ~ 79.5
Shock absorber upper mounting bolt
 137.2 ~ 156.9
 14.0 ~ 16.0
 101.2 ~ 115.7
Shock absorber lower mounting nut
 137.2 ~ 156.9
 14.0 ~ 16.0
 101.2 ~ 115.7
Brake caliper mounting bolt
 78.4 ~ 98.0
 8.0 ~ 10.0
 57.8 ~ 72.3
Wheel speed sensor mounting bolt
 6.8 ~ 10.7
 0.7 ~ 1.1
 5.0 ~ 7.9
Brake disc mounting bolt
 4.9 ~ 5.8
 0.5 ~ 0.6
 3.6 ~ 4.3
Hub assembly mounting bolt
 78.4 ~ 88.2
 8.0 ~ 9.0
 57.8 ~ 65.0
Upper arm ball joint mounting nut
 137.2 ~ 156.9
 14.0 ~ 16.0
 101.2 ~ 115.7
Lower arm mounting bolt
 137.2 ~ 156.9
 14.0 ~ 16.0
 101.2 ~ 115.7
Assist arm ball joint mounting nut
 44.1 ~ 53.9
 4.5 ~ 5.5
 32.5 ~ 39.7
Trailing arm mounting bolt
 44.1 ~ 53.9
 4.5 ~ 5.5
 32.5 ~ 39.7


Lubricants

Engine
 Lubricants
 Quantity
Gasoline 2.0
 BJ
 GRB006 (UREA)
 105g
TJ
 SH06-VX21(UREA)
 145g
Gasoline 2.4
 BJ
 GRB006 (UREA)
 105g
TJ
 SH06-VX21(UREA)
 145g


    Special Service Tools
    Special tools Tool(Number and Name) Illustration Use 09495-33000 Puller Removal of spider assembly from a drive sha ...

    See also:

    To cancel cruise control, do one of the following
    Press the brake pedal. Press the clutch pedal with a manual transaxle. Shift the shift lever into N (Neutral) with an automatic transaxle Press the CANCEL switch located on the steering w ...

    Variable Intake Solenoid (VIS) Valve. Description and Operation
    Description Variable Intake manifold Solenoid (VIS) valve is installed on the intake manifold. The VIS valve controls the vacuum modulator which activates a valve in the intake manifold. The ...

    Components and Components Location
    Component Location 1. Back view camera 2. Back view camera unit 3. LCD monitor ...