Hyundai Sonata: Specifications
Specifications
|
Item |
Specification |
|
|
Type |
Motor driven power steering system(EPS) |
|
|
Steering gear |
Type |
Rack & Pinion |
|
Rack stroke |
148mm (5.82 in.) |
|
|
Steering angle(Max.) |
Inner |
39.83°±1.5° |
|
Outer |
33.01° |
|
Tightening Torques
|
Item |
Tightening torque |
||
|
Nm |
kgf.m |
lb-ft |
|
|
Hub nuts |
88.3 ~ 107.9 |
9.0 ~ 11.0 |
65.1 ~ 79.6 |
|
Steering wheel lock nut |
39.2 ~ 49.0 |
4.0 ~ 5.0 |
28.9 ~ 36.2 |
|
Steering column mounting bolts and nuts |
12.7 ~ 17.7 |
1.3 ~ 1.8 |
9.4 ~ 13.0 |
|
Steering column to Universal joint |
53.9 ~ 63.7 |
5.5 ~ 6.5 |
39.8 ~ 47.0 |
|
Universal joint to pinion of steering gear |
32.4 ~ 37.3 |
3.3 ~ 3.8 |
23.9 ~ 27.5 |
|
Tie rod end castle nut |
34.3 ~ 44.1 |
3.5 ~ 4.5 |
25.3 ~ 32.5 |
|
Lower arm ball joint bolts |
98.1 ~ 117.7 |
10.0 ~ 12.0 |
72.3 ~ 86.8 |
|
Steering gear box mounting bolts |
88.3 ~ 107.9 |
9.0 ~ 11.0 |
65.1 ~ 79.6 |
|
Stabilizer link nut |
98.1 ~ 117.7 |
10.0 ~ 12.0 |
72.3 ~ 86.8 |
|
Sub frame stay mounting bolts & nuts |
44.1 ~ 58.8 |
4.5 ~ 6.0 |
32.5 ~ 43.4 |
|
Sub frame mounting bolts & nuts |
156.9 ~ 176.5 |
16.0 ~ 18.0 |
115.7 ~ 130.2 |
|
Roll rod mounting bolt & nut |
107.9 ~ 127.5 |
11.0 ~13.0 |
79.6 ~ 94.0 |
Special Service Tools
Special Service Tools
Tool (Number and Name)
Illustration
Use
09568-34000
Crossmember support
Supporting of the cro ...
See also:
Opening the fuel filler lid
The fuel filler lid must be opened from inside the vehicle by pushing the fuel
filler lid opener button.
✽ NOTICE
If the fuel filler lid will not open because ice has formed around it, ...
Specifications
Specifications
Hood
Type
Rear hinged, gas lifter type
Front Door
Construction
Front hinged, frame door construction
...
Compass Mirror. Repair procedures
Calibration Procedure
If the compass has been calibrated or set to variance zone number incorrectly,
or you are driving in specific places (tunnel, parking lot in building, underground
parki ...
