Hyundai Sonata: TPMS Receiver. Description and Operation - Tire Pressure Monitoring System - Suspension SystemHyundai Sonata: TPMS Receiver. Description and Operation

Operation

1.
General Function
A.
Auto-locate/learn takes place only once per Ignition cycle.
B.
On successful completion, 4 road wheel sensor ID's, together with their respective road wheel positions are latched into memory for monitoring.
C.
D.
Spare tire inflation / DTC state is not displayed.
2.
General Conditions to Learn New Sensors:
A.
Receiver must Auto-Locate 4 road sensors.
B.
C.
Receiver must determine that it is confident that sensor is not temporary:
1)
Uses vehicle speed.
2)
Uses confidence reduction of previously learned sensors.
D.
3.
General Conditions to Un-Learn a sensor that is removed:
A.
It takes less than 10 minutes at 20~30kph.
B.
Confidence reduction is dependant on vehicle speed and the number of sensors known to the receiver.

    TPMS Receiver. Schematic Diagrams
    Circuit Diagram Connector pin number Pin NO. Discription Remark 1 - 2 - ...

    TPMS Receiver. Repair procedures
    Replacement When the receiver first arrives for replacement: 1) It will be in Virgin State. ...

    See also:

    Special Service Tools
    Special Service Tools Tool (Number and Name) Illustration Use 09546-26000 Strut spring compressor Compression of co ...

    Satellite radio reception
    You may experience difficulties in receiving XMв„ў satellite radio signals in the following situations. If you are driving in a tunnel or a covered parking area. If you are driving beneath t ...

    Rear Lower Arm. Repair procedures
    Removal 1. Remove the rear wheel & tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) ...