Hyundai Sonata: Trailing Arm. Repair procedures - Rear Suspension System - Suspension SystemHyundai Sonata: Trailing Arm. Repair procedures

Replacement

1.
Remove the rear wheel & tire.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
Be careful not to damage to the hub bolts when removing the rear wheel & tire.
2.
Disconnect the parking brake cable (A) with the rear brake assembly.
3.
Loosen the parking brake cable bracket nuts (A) & trailing arm mounting nuts (B) and then remove the trailing arm with the rear axle.
Tightening torque:
44.1 ~ 53.9 N.m (4.5 ~ 5.5 kgf.m, 32.5 ~ 39.8 lb-ft)

4.
Loosen the parking brake cable bracket bolt (A).
5.
Loosen the mounting bolt and then remove the trailing arm (A) with the frame.
Tightening torque:
98.1 ~ 117.7 N.m (10.0 ~ 12.0 kgf.m, 72.3 ~ 86.8 lb-ft)

6.
Installation is the reverse of removal.

    Rear Assist Arm. Repair procedures
    Replacement 1. Remove the rear wheel & tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) ...

    Rear Cross Member. Repair procedures
    Replacement 1. Remove the rear wheel & tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) ...

    See also:

    Front Seat. Repair procedures
    Replaccement Seat Assembly Replacement 1. Remove the seat assembly mounting cover. 2. After loosening the seat assembly mounting bolts, rem ...

    Power Out Side Mirror Switch. Repair procedures
    Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the front door trim panel. (Refer to the BD group - "Front d ...

    MTS Antenna. Components and Components Location
    Components ...