Hyundai Sonata: Transaxle Oil Temperature Sensor. Repair procedures
Removal
1. |
Remove the battery and the battery tray. (Refer to
"Charging system" in EE group.)
|
2. |
Remove the under cover (A).
|
3. |
Replace new gasket and the plug after drining the
automatic transaxle fluid by removing the drain plug.
(Refer to "Automatic transaxle system" in this group.)
|
4. |
Remove the valve body cover (A) and eyebolt (B).
|
5. |
Disconnect the oil temperature sensor connector (A).
|
6. |
Remove the oil temperature sensor (A) after removing
a bolt.
|
Installation
1. |
Installation is the reverse of removal.
|
After replacement or reinstallation procedure of
the valve body assembly, must perform procedures below.
|
Transaxle Oil Temperature Sensor. Specifications
Specification Item Specification Type Negative Thermal Coefficient Type Operation temperature -40~165°C [-40~329°F] ...Inhibiter Switch. Description and Operation
Description Item Specification Type Combination of output signals from 4 terminals Power supply 12V ...See also:
Dimensions
*1 : with R16 tire
*2 : with R17 tire
*3 : with R18 tire ...
Description and Operation
Description
EPS (Electric power steering, Column assist type) system uses an electric
motor to assist the steering force and it is an engine operation independent
steering system.
EPS ...
Battery. Components and Components Location
Components
1. Battery insulation pad
2. Battery
3. Battery tray
4. Battery mounting bracket
...