Hyundai Sonata: Weight Classification System (WCS). Description and Operation
Description
In contrast to the initial one-stage airbag systems, newer restraint systems
involve complex logic to select, or alternatively suppress, various levels of
safety system deployment. Inherent to an Advanced Restraint System is the ability
to discern information regarding passenger occupancy. It is intended that these
inputs be provided through the WCS.
The object of such safety system is to reduce the risk and level of injuries
by automatically adapting the airbag(s) and seat belt pretensioner to the driving
status of the vehicle, its occupants, and the crash severity. The current WCS
covered in this specification continually senses and classifies the front passenger
side seat. The Occupant Classification System described in this section is Weight
Classification System(WCS) of strain gauge type. It consist of 2 weight sensors
and ECU which is classifying weight of occupant. It is installed on the seat
track assembly.
Seat Belt Buckle Switch (BS). Repair procedures
Removal
1.
Disconnect the battery negative cable, and wait for at least three
minutes before beginning work.
2.
Remove the front seat asse ...
See also:
Seat Belt Pretensioner (BPT). Description and Operation
Description
The Seat Belt Pretensioners (BPT) are installed inside Center Pillar (LH
& RH). When a vehicle crashes with a certain degree of frontal impact, the pretensioner
seat belt hel ...
Specifications
Specifications
Manual transaxle type
M6GF2
Engine type
Gasoline 2.4 GDI
Gear ratio
1st
3.267
...
Specifications
Specifications
Items
Specifications
Rated voltage
DC 12V
Operating temperature range
-30°C ~ +80°C (-22 ~ +176°F)
...
