Hyundai Sonata: Wheel. Repair procedures - Tires/Wheels - Suspension SystemHyundai Sonata: Wheel. Repair procedures

Hub nut tightening sequence

Tighten the hub nuts as follows.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)

When using an impact gun, final tightening torque should be checked using a torque wrench.
Run out inspection
1.
Jack up the vehicle.
2.
Measure the wheel Run-out by using a dial indicator as illustration below.
Run-out
 Aluminum
Radial mm(in.)
 Below 0.3(0.012)
Lateral mm(in.)
 Below 0.3(0.012)

3.
If measured value exceeds the standard value, replace the wheel.

    Tire. Repair procedures
    • Using tires and wheel other than the recommended sizes could cause unusual handling charact ...

    Alignment. Repair procedures
    Front Wheel Alignment When using a commercially available computerized wheel alignment equipment to inspect the front wheel al ...

    See also:

    Transaxle Oil Temperature Sensor. Specifications
    Specification Item Specification Type Negative Thermal Coefficient Type Operation temperature -40~165°C [-40~329°F] ...

    Dimensions
    *1 : with R16 tire *2 : with R17 tire *3 : with R18 tire ...

    Rear Door. Components and Components Location
    Components 1. Door module 2. Window glass 3. Outside handle 4.Outside handle cover 5.Door handle pad 6. Door checker 7. Door speaker 8.Hole plug ...