Hyundai Sonata: Fan speed control - Manual heating and air conditioning - Automatic climate control system - Features of your vehicleHyundai Sonata: Fan speed control

The fan speed can be set to the desired speed by pushing the fan speed control

The fan speed can be set to the desired speed by pushing the fan speed control button.

To change the fan speed, press the right of the button (for higher speed, or press the left of the button ()) for higher speed, or press the left of the button (for lower speed. To turn the fan speed control off, press the OFF button.) for lower speed. To turn the fan speed control off, press the OFF button.

    Air intake control
    Type A Type B This is used to select the outside (fresh) air position or recirculated air position. To change the air intake control position, push the control button. Recirculated air po ...

    Air conditioning
    Push the A/C button to turn the air conditioning system on (indicator light will illuminate). Push the button again to turn the air conditioning system off. ...

    See also:

    Knock Sensor (KS). Description and Operation
    Description Knocking is a phenomenon characterized by undesirable vibration and noise and can cause engine damage. Knock Sensor (KS) is installed on the cylinder block and senses engine knoc ...

    OFF mode
    Push the OFF button to turn off the air climate control system. However, you can still operate the mode and air intake buttons as long as the ignition switch is in the ON position. The vented ...

    Shift Lever. Repair procedures
    Removal 1. Remove the front console assembly.(Refer to "Interior" in BD group) 2. Remove the snap pin (A) and the clips (B). ...