Hyundai Sonata: Checking the amount of air conditioner refrigerant and compressor lubricant - Manual climate control system - Features of your vehicleHyundai Sonata: Checking the amount of air conditioner refrigerant and compressor lubricant

Hyundai Sonata YF 2011-2014 Owner's Manual / Features of your vehicle / Manual climate control system / Checking the amount of air conditioner refrigerant and compressor lubricant

When the amount of refrigerant is low, the performance of the air conditioning is reduced. Overfilling also has a negative influence on the air conditioning system.

Therefore, if abnormal operation is found, have the system inspected by an authorized HYUNDAI dealer.

✽ NOTICE

It is important that the correct type and amount of oil and refrigerant is used. Otherwise, damage to the compressor and abnormal system operation may occur.

WARNING

The air conditioning system should be serviced by an authorized HYUNDAI dealer. Improper service may cause serious injury to the person performing the service.

    Climate control air filter
    The climate control air filter installed behind the glove box filters the dust or other pollutants that come into the vehicle from the outside through the heating and air conditioning system. If ...

    Automatic climate control system
    Type A Type B 1. Front windshield defrost button 2. Rear window defrost button 3. AUTO (automatic control) button 4. OFF button 5. Driver’s temperature control knob 6. Mode indicator 7. ...

    See also:

    Snow tires
    If you equip your car with snow tires, they should be the same size and have the same load capacity as the original tires. Snow tires should be installed on all four wheels; otherwise, poor handli ...

    Curtain Airbag (CAB) Module. Description and Operation
    Description Curtain airbags are installed inside the headliner (LH and RH) and protect the driver and passenger from danger when side crash occurs. The SRSCM determines deployment of curtain ...

    Auto down window (if equipped) (driver’s window)
    Pressing the power window switch momentarily to the second detent position (6) completely lowers the driver’s window even when the switch is released. To stop the window at the desired posit ...