Hyundai Sonata: Fuel Pump. Repair procedures
Removal
1. |
Release the residual pressure in fuel line (Refer to “Release
Residual Pressure in Fuel Line” in this group).
|
2. |
Remove the fuel pump service cover (A) in the trunk.
|
3. |
Disconnect the fuel pump connector (A) and the fuel tank pressure
sensor connector (B).
|
4. |
Disconnect the fuel feed tube quick connector (C) and the vapor
tube quick-connector (D).
|
5. |
Remove locking ring (E) by use the special service tool [SST No.
: 09310-2S200].
|
6. |
Disconnector the vapor tube quck-connector (A) at the fuel pump,
and then remove the fuel pump from the fuel tank.
|
Installation
1. |
Installation is reverse of removal.
|
Fuel Tank. Repair procedures
Removal
1.
Release the residual pressure in fuel line (Refer to “Release
Residual Pressure in Fuel Line” in this group).
2.
Remove the ...
Fuel Filter. Repair procedures
Replacement
1.
Remove the fuel pump (Refer to “Fuel Pump” in this group).
2.
Disconnect the electric pump wiring connector (A) and the fuel ...
See also:
TPMS Receiver. Description and Operation
Operation
1.
General Function
A.
Auto-locate/learn takes place only once per Ignition cycle.
B.
O ...
Air intake control
Type A
Type B
This is used to select the outside (fresh) air position or recirculated air position.
To change the air intake control position, push the control button.
Recirculated air po ...
Description and Operation
Description
Ignition timing is controlled by the electronic control ignition timing
system. The standard reference ignition timing data for the engine operating
conditions are preprogrammed ...