Hyundai Sonata: Mirror. Repair procedures - Exterior - Body (Interior and Exterior)Hyundai Sonata: Mirror. Repair procedures

Replacement

Outside Rear View Mirror Replacement
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Put on gloves to protect your hands.
1.
Using a screwdriver, remove the quadrant inner cover (A).
2.
After disconnecting the connector (A), remove the outside rear view mirror (B).
Tightening torque :
6.9~10.8 N.m(0.7~1.1 kgf.m, 5.1~8.0 lb-ft)

3.
Installation is the reverse of removal.
Inside Rear View Mirror Assembly Replacement
ECM Mirror Replacement
1.
Remove the ECM mirror cover (A).
2.
After loosening the mounting screw (A), then disconnect the connector (B).
3.
Push the ECM mirror base up to remove the ECM mirror assembly (A).
4.
Installation is the reverse of removal.

    Panoramaroof. Repair procedures
    Replacements Glass Replacement 1. Remove the cover (A). 2. After loosening the mounting screws, then remove the movable glass ...

    Cowl Top Cover. Repair procedures
    Replacement 1. Remove the covers and remove the nuts, then remove the wiper arm (A). 2. Detach the clips, then remove the cowl top ...

    See also:

    Crankshaft Position Sensor (CKPS). Description and Operation
    Description Crankshaft Position Sensor (CKPS) detects the crankshaft position and is one of the most important sensors of the If there is no CKPS signal input, the engine may stop because of ...

    Seat Belt Buckle Switch (BS). Components and Components Location
    Components ...

    Seat belt warning (for front passenger’s seat)
    Type A Type B The front passenger's seat belt warning light will activate to the following table when the ignition switch is in "ON" position. *1 The seat belt warning lig ...