Hyundai Sonata: Alternator Description and Operation - Charging System - Engine Electrical SystemHyundai Sonata: Alternator Description and Operation

Description
The Alternator has eight built-in diodes, each rectifying AC current to DC current.
Therefore, DC current appears at alternator "B" terminal.
In addition, the charging voltage of this alternator is regulated by the battery voltage detection system.
The alternator is regulated by the battery voltage detection system.
The main components of the alternator are the rotor, stator, rectifier, capacitor brushes, bearings and V-ribbed belt pulley.
The brush holder contains a built-in electronic voltage regulator.

1. Brush
2. OAD (Overrunning Alternator Decoupler)
3. Rotor
4. Stator

    Repair procedures
    On-vehicle Inpection     • First of all, check for DTCs. If a DTC is present, perform troubleshooting in accordance with the procedure for that DTC. (Refer to DTC guide) ...

    Alternator Specifications
    Specification ItemSpecificationRated voltage 13.5V, 130A Speed in use 1,000 ~ 18,000 rpm Voltage regulator IC Regulator built-in type Regulator Setting Voltage External mode Re ...

    See also:

    Smart key unit. Schematic Diagrams
    Circuit Diagram ...

    Input Speed Sensor. Specifications
    Specification Item Specification Type Hall Effect Sensor,  2pins (Power: 9V, Signal) Operation condition -40 ~15 ...

    Power Mosfet Description and Operation
    Description It is installed to the DATC and adjusts the fan rpm by precisely controlling the voltage applied to the blower motor. ...