Canister Close Valve (CCV) is installed on the canister ventilation line. It seals evaporative emission control system by shutting the canister from the atmosphere when leakage detecting system operates.

Fuel Pressure Control Valve. Repair procedures

Inspection 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the fuel pressure regulator valve ...

Canister Close Valve (CCV). Specifications

Specification Item Specification Coil Resistance (Ω) 19.9 ~ 22.9 [20°C(68°F) ...

See also:

Power Door Lock Relay. Repair procedures
Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the junction box. 3. Check for continuit ...

Repair procedures
General Inspection After or before servicing the EPS system, perform the troubleshooting and test procedure as follows. Compare the system condition with normal condition in the table below ...

Description and Operation
Description The immobilizer system will disable the vehicle unless the proper ignition key is used. In addition to the currently available anti-theft systems such as car alarms, the immobili ...