Hyundai Sonata: Canister Repair procedures - Evaporative Emission Control System - Emission Control SystemHyundai Sonata: Canister Repair procedures

Removal
1.
Turn the ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the fuel tank.
(Refer to Engine Control / Fuel System - " Fuel Tank")
3.
Disconnect the vent hose (A).
4.
Disconnect the vapor tube quick-connector (B,C).

5.
Remove installation bolts (A) and then remove the canister assembly.

Inspection
1.
Check for the following items visually.
A.
Cracks or leakage of the canister
B.
Loose connection, distortion, or damage of the vapor hose/tube

A: Canister - Atmosphere
B: Canister - Fuel Tank
C: Canister - Intake Manifold
Installation
1.
Install in the reverse order of removal.
    Repair procedures
    Inspection [System Inspection] 1. Disconnect the vapor hose from the intake manifold and connect a vacuum pump to the nipple on the intake manifold. В· At Cold Engine [Engine Coolant Temperatu ...

    Fuel Filler Cap Description and Operation
    Description A ratchet tightening device on the threaded fuel filler cap reduces the chances of incorrect installation, which would seal the fuel filler. After the gasket on the fuel filler cap ...

    See also:

    CVVT (Continuously Variable Valve Timing) System. Description and Operation
    Description Continuous Variable Valve Timing (CVVT) system advances or retards the valve timing of the intake and exhaust valve in accordance with the ECM control signal which is calculated ...

    Smooth cornering
    Avoid braking or gear changing in corners, especially when roads are wet. Ideally, corners should always be taken under gentle acceleration. If you follow these suggestions, tire wear will be ...

    Repair procedures
    Inspection 1. After disconnecting the vapor hose from the PCV valve, remove the PCV valve. 2. Reconnect the PCV valve to the vapor hose. ...