Hyundai Sonata: Cylinder Block Components and Components Location - Cylinder Block - Engine Mechanical SystemHyundai Sonata: Cylinder Block Components and Components Location

Components

1.  Cylinder block
2.  Ladder frame
3.  Crank shaft
4.  Crank shaft upper bearing
5.  Crank shaft lower bearing
6.  Thrust bearing
7.  Main bearing cap
8.  Crank shaft sproket
9.  Crank shaft pulley
10. Piston ring
11. Piston
12. Connecting rod
13. Connecting rod upper bearing
14. Connecting rod lower bearing
15. Connecting rod bearing cap

    Rear Oil Seal Repair procedures
    Removal 1. Remove the transaxle assembly. (Refer to transaxle - "Manual Transaxle assembly, Auto Transaxle assembly") 2. MT : Remove the flywheel. (Refet to Cylinder Block - "Flywheel") 3 ...

    Cylinder Block Repair procedures
    Removal Engine removal is required for this procedure. (Refer to Engine and transaxle assembly removal in this group) 1. MT : Remove the flywheel. (Refet to Cylinder Block - "Flywheel") 2. ...

    See also:

    CVVT Oil Control Valve (OCV). Description and Operation
    Description Continuous Variable Valve Timing (CVVT) system advances or retards the valve timing of the intake and exhaust valve in accordance with the ECM control signal which is calculated ...

    Front Seat Cushion Cover Repair procedures
    Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with pr ...

    Description and Operation
    Warning Lamp Activation Warning Lamp Behavior after Ignition On As soon as the operating voltage is applied to the SRSCM ignition input, the SRSCM activates the warning lamp for a LED lamp c ...