Hyundai Sonata: Cylinder Head Cover Components and Components Location - Cylinder Head Assembly - Engine Mechanical SystemHyundai Sonata: Cylinder Head Cover Components and Components Location

Components

1. Cylinder head cover
2. Cylinder head cover gasket
3. Cam position sensor

    Valve Clearance Adjustment
    Valve Clearance Inspection And Adjustment     Inspect and adjust the valve clearance when the engine is cold (Engine coolant temperature : 20В°C) and cylinder head is installed ...

    Cylinder Head Cover Repair procedures
    Removal 1. Remove the engine cover. 2. Disconnect the battery negative terminal. 3. Remove the air clean hose. (Refer to Intake and Exhaust System - "Ari Cleaner") 4. Disconnect the ...

    See also:

    Rear Glass Defogger Printed Heater Repair procedures
    Inspection     Wrap tin foil around the end of the voltmeter test lead to prevent damaging the heater line. Apply finger pressure on the tin foil, moving the tin foil along th ...

    Repair procedures
    Component Replacement After Deployment Before doing any SRS repairs, use the GDS Pro to check for DTCs. Refer to the Diagnosti ...

    Injector. Repair procedures
    Inspection 1. Turn the ignition switch OFF. 2. Disconnect the injector connector. 3. Measure resistance betwee ...