Hyundai Sonata: Door Mood Lamp Repair procedures - Lighting System - Body Electrical SystemHyundai Sonata: Door Mood Lamp Repair procedures

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front door trim.
(Refer to Body - "Front Door Trim")
3.
Disconnect the door mood lamp connector.
4.
Remove the door mood lamp (A).

Installation
1.
Install the door mood lamp and connector.
2.
Install the front door trim.
3.
Connect the negative (-) battery terminal.
    Overhead Console Lamp Repair procedures
    Inspection 1. Remove the overhead console lamp assembly then check for continuity between terminals. If the continuity is not as specified, replace the map lamp switch. Removal 1. Disconn ...

    Hazard Lamp Switch Repair procedures
    Inspection 1. Check for continuity between terminals. If the continuity is not as specified, replace the hazard lamp switch. AVN typeAudio typeNoDescription NoDescription 1GND1GND 2CAN _ Hig ...

    See also:

    Lumber Support Units Repair procedures
    Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the front seat assembly. (Refer to Body - "Front Seat Assembly") 3. Remove the seat back. (Refer to Body - "Front Seat ...

    Knock Sensor (KS) Description and Operation
    Description Knocking is a phenomenon characterized by undesirable vibration and noise and can cause engine damage. Knock Sensor (KS) is installed on the cylinder block and senses engine knockin ...

    Windshield Glass. Components and Components Location
    Components 1. Windshield glass ...