Hyundai Sonata: Engine Room Under Cover Repair procedures - Engine And Transmission Assembly - Engine Mechanical SystemHyundai Sonata: Engine Room Under Cover Repair procedures

Removal and Installation
1.
Loosen the mounting clip and bolt and then remove the under cover (A).

Tightening torque:
7.8 ~ 11.7N.m (0.8 ~1.2kgf.m, 5.7 ~ 8.6 lb-ft)

2.
Install in the reverse order of removal.
    Engine Mounting Components and Components Location
    Components 1. Transaxle mounting bracket2. Roll road bracket3. Engine mounting bracket4. Engine mounting support bracket ...

    See also:

    CVVT Oil Control Valve (OCV). Description and Operation
    Description Continuous Variable Valve Timing (CVVT) system advances or retards the valve timing of the intake and exhaust valve in accordance with the ECM control signal which is calculated ...

    How does the air bag system operate
    Air bags are activated (able to inflate if necessary) only when the ignition switch is turned to the ON or START position. Air bags inflate instantly in the event of serious frontal or side co ...

    Side Airbag (SAB) Module Repair procedures
    Removal     The side airbag cannot be disassembled from the seat back assembly, so replace the seat back assembly when replacing the side airbag. 1. Disconnect the batter ...