Hyundai Sonata: Front Lower Arm Repair procedures - Front Suspension System - Suspension SystemHyundai Sonata: Front Lower Arm Repair procedures

Replacement
1.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the wheel cap (A).

   
Be careful not to damage to the wheel cap (A) when removing the it.
3.
Remove the front wheel and tire (A) from front hub.

   
Be careful not to damage to the hub bolts when removing the front wheel and tire (A).
4.
Remove the lower arm (A).
(1)
Remove the split pin (B).
(2)
Loosen the mounting nut and bolt.

Tightening torque :
98.1 ~ 117.7 N.m (10.0 ~ 12.0 kgf.m, 72.3 ~ 86.8 lb-ft)

5.
Remove the front lower arm (A) and then loosen the bolts & nuts.

Tightening torque
Front : 117.7 ~ 137.3 N.m (12.0 ~ 14.0 kgf.m, 86.8 ~ 101.3 lb-ft)
Rear : 156.9 ~ 176.5 N.m (16.0 ~ 18.0 kgf.m, 115.7 ~ 130.2 lb-ft)

6.
Installation is the reverse of removal.
Inspection
1.
Check the bushing for wear and deterioration.
2.
Check the front stabilizer bar for deformation.
3.
Check the all bolts and nuts.
    Front Strut Assembly Repair procedures
    Replacement 1. Raise the vehicle, and make sure it is securely supported. 2. Remove the wheel cap (A).     Be careful not to damage to the wheel cap (A) when removing the it ...

    Front Stabilizer Bar Repair procedures
    Inspection 1. Raise the vehicle, and make sure it is securely supported. 2. Remove the wheel cap (A).     Be careful not to damage to the wheel cap (A) when removing the it. ...