Hyundai Sonata: Front Mud Guard Repair procedures - Body Side Molding - Body (Interior and Exterior)Hyundai Sonata: Front Mud Guard Repair procedures

Replacement
   
When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Take care not to scratch the body surface.
1.
After loosening the mounting screw, then remove the front mud guard (A) by using a screw driver.

2.
Install in the reverse order of removal.
   
Replace any damaged clips.
    Fender Garnish Repair procedures
    Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with pro ...

    Rear Mud Guard Repair procedures
    Replacement     • When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to ...

    See also:

    Side Body Body Repair
    Side Body A * These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ] Side Body B * These dimensions indicated in this figure are actual-measuremen ...

    License plate light bulb replacement
    1. Loosen the retaining screws with a philips head screwdriver. 2. Remove the soket by turning it connterclockwise. 3. Remove the bulb by pulling it straight out. 4. Install a new bulb. 5. Rei ...

    Speakers Repair procedures
    Inspection 1. Troubleshooting for Speaker (1) Basic inspection of speaker Inspect the sound from speaker after verifying that the speaker mounting screws is removed and the wiring connector i ...