Hyundai Sonata: Front Seat Belt Buckle Repair procedures - Front Seat Belt - Body (Interior and Exterior)Hyundai Sonata: Front Seat Belt Buckle Repair procedures

Replacement
1.
Remove the front seat assembly.
(Refer to Front Seat - "Front Seat Assembly")
2.
Remove the front seat belt buckle connector wiring harness (A).

3.
After loosening the mounting bolt, then remove the front seat belt buckle (A).

Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5kgf.m, 28.9 ~ 39.8 lb-ft)

4.
Install in the reverse order of removal.
   
Make sure the connector is plugged in properly.
Replace any damaged clips.
    Front Seat Belt Buckle Components and Components Location
    Component Location 1. Front seat belt buckle ...

    See also:

    Seat Belt Pretensioner (BPT). Components and Components Location
    Components ...

    General Information
    General 1. Basically, all measurements in this manual are taken with a tracking gauge. 2. When a measuring tape is used, check to be sure there is no elongation, twisting or bending. 3. ...

    Audio Remote Control. Repair procedures
    Inspection 1. Check the audio remote control switch for resistance between No.3 and No.5 terminals in each switch position. Switch ...