Hyundai Sonata: Front Seat Shield Inner Cover Repair procedures - Front Seat - Body (Interior and Exterior)Hyundai Sonata: Front Seat Shield Inner Cover Repair procedures

Replacement
   
Put on gloves to protect your hands.
   
When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
1.
Remove the front seat assembly.
(Refer to Front Seat - "Front Seat Assembly")
2.
Using a screwdriver or remover, remove the front seat shield inner cover (A).

3.
Install in the reverse order of removal.
   
Replace any damage clips.
    Front Seat Shield Inner Cover Components and Components Location
    Component Location 1. Front seat shield inner cover ...

    Front Seat Back Cover Components and Components Location
    Component Location 1. Front seat back cover ...

    See also:

    Console. Components and Components Location
    Components 1. Console assembly 2. Console upper cover 3. Extension side cover 4. Crash pad garnish ...

    Body Control Module (BCM). Schematic Diagrams
    BCM Connector Terminals BCM Input Signal SPEC No Input signal name Logic state ON/OFF voltage recognition level (V) Remarks ...

    Seat Heater Switch Repair procedures
    Removal [Front Seat] 1. Disconnect the negative (-) battery terminal. 2. Remove the heater and A/C control unit. (Refer to Heating, Ventilation and Air Conditioning - "Controller") [Rear ...