Hyundai Sonata: Hazard Lamp Switch Repair procedures - Lighting System - Body Electrical SystemHyundai Sonata: Hazard Lamp Switch Repair procedures

Inspection
1.
Check for continuity between terminals. If the continuity is not as specified, replace the hazard lamp switch.

AVN type
Audio type
No
Description
No
Description
1
GND
1
GND
2
CAN _ High
2
-
3
CAN _ Low
3
-
4
-
4
-
5
Detent
5
Detent
6
ACC
6
Acc
7
Battery (+)
7
Battery (+)
8
PAB Off
8
PAB Off
9
-
9
Illumination (-)
10
-
10
Illumination (+)
11
SBR _ PS
11
SBR PS
12
-
12
-
13
Hazard lamp switch
13
Hazard lamp switch
14
-
14
-
15
IGN (+)
15
IGN (+)
16
-
16
-

Removal
   
Wrap the protective tape on the tool to disassemble with the screwdriver or remover.
e caution in keeping and handling during disassembling/assembling because it is easily contaminated with lubricant and oil.
Use caution for the crash pad garnish and door trim upper garnish made of timber (Real wood) because they can be scratched or picked.
Be careful not to scratch the door trim and other parts.
1.
Disconnct the negative (-) battery terminal.
2.
Remove the center facia panel (A).

3.
Remove the center facia panel after disconnect the center facia panel.

4.
Remove the keyboard unit after loosening the screws.

Installation
1.
Install the hazard lamp switch.
2.
Install the center facia panel.
3.
Connect the negative (-) battery terminal.
    Door Mood Lamp Repair procedures
    Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the front door trim. (Refer to Body - "Front Door Trim") 3. Disconnect the door mood lamp connector. 4. Remove the ...

    See also:

    Manual climate control system
    1. Turn the ignition switch to the ON position. 2. Turn the mode selection knob to the defrost position (). 3. Push the air intake control button at least 5 times within 3 seconds. The indicator ...

    In-car Sensor Repair procedures
    Diagnosis With GDS 1. The heating, ventilation and air conditioning can be quickly diagnosed failed parts with vehicle diagnostic system (GDS). ? The diagnostic system (GDS) provides the follow ...

    Components and Components Location
    Components 1. Glass motor2. Roller blind motor3. Mechanism assembly4. Front decoration cover 5. Wind deflector6. Center cover assembly7. Roof side moulding8. Inner decoration cover 9. Rear glass1 ...