Hyundai Sonata: Hood Latch Repair procedures - Hood - Body (Interior and Exterior)Hyundai Sonata: Hood Latch Repair procedures

Replacement
1.
Remove the front bumper.
(Refer to Front bumper - "Front bumper cover")
2.
Remove the head lamps [RH].
(Refer to Body Electrical System - "Head Lamps")
3.
Disconnect the connector (A), then remove the wiring mounting clips.

4.
Remove the hood latch (A) mounting bolts.

5.
Disconnect the hood latch cable (A) and remove the hood lower latch assembly (B).

6.
Install in the reverse order of removal.
   
Make sure the hood latch release cable is connected properly.
Make sure the hood locks / unlocks and opens / closes properly.
Adjust the latch alignment.
    Hood Latch Components and Components Location
    Component Location 1. Hood latch assembly ...

    Trunk Lid
    ...

    See also:

    Specifications
    Specifications Item Specification Master cylinder Type Tandem Cylinder I.D. 22.22mm Pisto ...

    Description and Operation
    Description The charging system included a battery, an alternator with a built-in regulator, and the charging indicator light and wire. The Alternator has eight built-in diodes, each rectifying AC ...

    Automatic Transaxle. Components and Components Location
    Components (1) Components (2) 1. Automatic transaxle case 2. Low & reverse brake piston 3. Low & reverse brake return spring 4. Snap ring 5. Front annulus ...