Hyundai Sonata: In-car Sensor Description and Operation - Air Conditioning System - Heating, Ventilation and Air ConditioningHyundai Sonata: In-car Sensor Description and Operation

Description
The sensor contains a thermistor which measures the temperature of the inside. The signal decided by the resistance value which changes in accordance with perceived inside temperature, is delivered to heater control unit and according to this signal the control unit regulates incar temperature to intended value.
When changing the resistance value by sensing the temperature caused by intake indoor air, the corresponding voltage is transmitted to the thermostat module.

    Evaporator Temperature Sensor Repair procedures
    Inspection 1. Turn the ignition switch OFF. 2. Disconnect the evaporator temperature sensor connector. 3. Measure the resistance between terminal "+" and "-" of the evaporator temperature ...

    In-car Sensor Repair procedures
    Diagnosis With GDS 1. The heating, ventilation and air conditioning can be quickly diagnosed failed parts with vehicle diagnostic system (GDS). ? The diagnostic system (GDS) provides the follow ...

    See also:

    Repair procedures
    Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the driver crash pad lower panel. (Refer to the BD group - "Cra ...

    Brake Line Components and Components Location
    Components ...

    A/C Pressure Transducer Description and Operation
    Description The A/C Pressure Transducer (APT) converts the pressure value of high pressure line into voltage value after measuring it. By converted voltage value, engine ECU controls the coolin ...