Hyundai Sonata: Input shaft speed sensor 1 Description and Operation - Dual Clutch Transmission Control System - DCT (Dual Clutch Transmission) SystemHyundai Sonata: Input shaft speed sensor 1 Description and Operation

Description
Components location : DCT (Dual Clutch Transmission)

Function
The input shaft speed sensor is important in that it detects the input shaft RPM and sends this information to the Transmission Control Module (TCM).
It provides important input information for electric control.
The information is needed in all operations, including feedback control, gear shift control and failure detection of other sensors.
    Input shaft speed sensor 1 Specifications
    Specification ItemSpecificationTypeHall effect sensorOperation condition (°C)°F(-40 ~ 150)-40 ~ 302Output signal (mA)High: 11.8 ~ 16.8Low: 5.9 ~ 8.4 ...

    See also:

    Components and Components Location
    Components [General Type] 1. Roof trim2. Sunvisor [LH]3. Sunvisor [RH]4. Assist handle bracket [Panorama Sunroof Type] 1. Roof trim2. Sunvisor [LH]3. Sunvisor [RH]4. Assist handle brac ...

    Changing the coolant
    Have coolant changed by an authorized HYUNDAI dealer according to the Maintenance Schedule at the beginning of this section. CAUTION Put a thick cloth or fabric around the radiator cap before refi ...

    Power Door Lock Switch Repair procedures
    Inspection Diagnosis with GDS 1. The body electrocal system can be quickly diagnosed failed parts with vehicle diagnostic system (GDS). The diagnostic system (GDS) provides the following informa ...