Hyundai Sonata: Input shaft speed sensor 2 Components and Components Location - Dual Clutch Transmission Control System - DCT (Dual Clutch Transmission) SystemHyundai Sonata: Input shaft speed sensor 2 Components and Components Location

Components

1. Input shaft speed sensor 1 (Odd)
2. Input shaft speed sensor 2 (Even)


    Input shaft speed sensor 1 Repair procedures
    Removal 1. Remove the air cleaner assembly and air duct. (Refer to Engine Mechnical System - "Air cleaner") 2. Remove the TCM. (Refer to Dual Clutch Transmission Control System - "TCM") ...

    Input shaft speed sensor 2 Specifications
    Specification ItemSpecificationTypeHall effect sensorOperation condition (°C)°F(-40 ~ 150)-40 ~ 302Output signal (mA)High: 11.8 ~ 16.8Low: 5.9 ~ 8.4 ...

    See also:

    Blue Link
    Hyundai aims to offer differentiated customer values through a ‘Connected Car Life,’ which is to provide consumers with fast and reliable IT technology. As consumers’ lifestyles become more ...

    Indicator light
    When ignition switch is turned to ON, the indicator light illuminates, then goes off if the ESC system is operating normally. The ESC indicator light blinks whenever ESC is operating or illumina ...

    Tire replacement
    Tread wear indicator If the tire is worn evenly, a tread wear indicator will appear as a solid band across the tread. This shows there is less than 1/16 inch (1.6 mm) of tread left on the tir ...