Hyundai Sonata: Intake Actuator Components and Components Location - Blower - Heating, Ventilation and Air ConditioningHyundai Sonata: Intake Actuator Components and Components Location

Components Location

1. Intake actuator


    Climate Control Air Filter Repair procedures
    Replacement 1. Remove the stopper (B) from the glove box (A). 2. Disconnect the air damper (A) from the glove box (B). 3. Remove the filter cover (A) by pressing the knob. 4. Replace t ...

    Intake Actuator Description and Operation
    Description The intake actuator is located at the blower unit. It regulates the intake door by a signal from the control unit. Pressing the intake selection switch will shift between recirculat ...

    See also:

    TPMS Receiver Description and Operation
    Description 1. Mode (1) Virgin State A. The receiver as a sole part is shipped in this state. Replacement parts should therefore arrive in this state. B. In this state, there is no Auto-L ...

    Front Body Body Repair
    Front Body A * These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ] Front Body B * These dimensions indicated in this figure are actual-measurem ...

    Components and Components Location
    Component Location (1) 1. Smart key unit (SMK)2. Interior antenna 23. Door outside handle4. Interior antenna 15. Buzzer Component Location (2) 1. Trunk open switch2. Bumper antenna3. Trunk ...