Hyundai Sonata: Interior light bulb replacement

1. Using a flat-blade screwdriver, gently pry the lens from the interior light
housing.
2. Remove the bulb by pulling it straight out.
WARNING
Prior to working on the Interior Lights, ensure that the “OFF” button is depressed to avoid burning your fingers or receiving an electric shock.
3. Install a new bulb in the socket.
4. Align the lens tabs with the interior light housing notches and snap the lens
into place.
CAUTION
Use care not to dirty or damage lens, lens tab, and plastic housings.
License plate light bulb replacement
1. Loosen the retaining screws with a philips head screwdriver.
2. Remove the soket by turning it connterclockwise.
3. Remove the bulb by pulling it straight out.
4. Install a new bulb.
5. Rei ...
Appearance care
...
See also:
Alternator. Repair procedures
Removal and Installation
1.
Disconnect the battery negative terminal first, then the positive
terminal.
Tightening torque :
(+) term ...
Engine Coolant Temperature Sensor (ECTS). Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Remove the ECTS (Refer to "Removal").
3.
After immers ...
Passenger Airbag (PAB) Module. Description and Operation
Description
The passenger airbag (PAB) is installed inside the crash pad and protects
the front passenger in the event of a frontal crash. The SRSCM determines if
and when to deploy the PAB. ...
