Hyundai Sonata: License Lamp. Repair procedures
Removal
| 1. |
Disconnect the negative(-) battery terminal.
|
| 2. |
Remove the lens (A) after loosening the mounting screws.
|
| 3. |
Replace the bulb (A).
|
Installation
| 1. |
Install the bulb.
|
| 2. |
Install the license lamp lens.
|
Overhead Console Lamp. Repair procedures
Inspection
Remove the overhead console lamp assembly then check for continuity between
terminals. If the continuity is not as specified, replace the map lamp switch.
Removal
...
Hazard Lamp Switch. Repair procedures
Inspection
Hazard Lamp Switch
1.
Remove the center fascia panel.
(Refer to the BD group - "Crash pad")
2.
Disconnect the ...
See also:
Battery replacement
The transmitter uses a 3 volt lithium battery which will normally last for several
years. When replacement is necessary, use the following procedure.
1. Insert a slim tool into the slot and gen ...
Engine Mounting. Components and Components Location
Components
1. Transaxle mounting bracket
2. Roll rod bracket
3. Sub frame
4. Engine mounting bracket
5. Engine mounting support bracket
...
Special Service Tools
Special tools
Tool(Number and Name)
Illustration
Use
09495-33000
Puller
Removal of spider assembly from a drive sha ...