Hyundai Sonata: Manifold Absolute Pressure Sensor (MAPS) Description and Operation - Engine Control System - Engine Control / Fuel SystemHyundai Sonata: Manifold Absolute Pressure Sensor (MAPS) Description and Operation

Description
Manifold Absolute Pressure Sensor (MAPS) is a speed-density type sensor and is installed on the surge tank. It senses absolute pressure of the surge tank and transfers the analog signal proportional to the pressure to the ECM. By using this signal, the ECM calculates the intake air quantity and engine speed.
The MAPS consists of a piezo-electric element and a hybrid IC amplifying the element output signal. The element is silicon diaphragm type and adapts pressure sensitive variable resistor effect of semi-conductor. Because 100% vacuum and the manifold pressure apply to both sides of the sensor respectively, this sensor can output analog signal by using the silicon variation proportional to pressure change.

    ETC (Electronic Throttle Control) System Repair procedures
    Inspection Throttle Position Sensor (TPS) 1. Connect the GDS on the Data Link Connector (DLC). 2. Start the engine and measure the output voltage of TPS 1 and 2 at C.T. and W.O.T. Specific ...

    Manifold Absolute Pressure Sensor (MAPS) Specifications
    Specification Pressure[kPa (kgf/cm?, psi)]Output Voltage (V)32.5 (0.33, 4.71)0.5284 (2.90, 41.19)4.5 ...

    See also:

    Lane Departure Warning System (LDWS) Unit Components and Components Location
    Components ...

    Canister Repair procedures
    Removal 1. Turn the ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the fuel tank. (Refer to Engine Control / Fuel System - " Fuel Tank") 3. Disconnect th ...

    Compressor oil Repair procedures
    Oil Specification 1. The R-134a system requires synthetic (ND8) compressor oil whereas the R-12 system requires mineral compressor oil. The two oils must never be mixed. 2. Compressor (ND8 ...