Hyundai Sonata: Mode Control Actuator Description and Operation - Heater - Heating, Ventilation and Air ConditioningHyundai Sonata: Mode Control Actuator Description and Operation

Description
The mode control actuator is located at the heater unit.
It adjusts the position of the mode door by operating the mode control actuator based on the signal of the A/C control unit. Pressing the mode select switch makes the mode control actuator shift in order of Vent > Bi-Level > Floor > Mix.
    Mode Control Actuator Components and Components Location
    Components Location 1. Mode control actuator ...

    Mode Control Actuator Repair procedures
    Inspection 1. Turn the ignition switch OFF. 2. Disconnect the mode control actuator connector. 3. Verify that the mode control actuator operates to the defrost mode when connecting 12V to ...

    See also:

    Specifications
    Specifications Purge Control Solenoid Valve (PCSV) ? Specification ItemSpecificationCoil Resistance (?)22.0 ~ 26.0 [20°C(68°F)] Fuel Tank Pressure Sensor (FTPS) ? Type: Piezo-Resistive ...

    Yaw-rate and Lateral G Sensor. Description and Operation
    Description When the vehicle is turning with respect to a vertical axis the yaw rate sensor detects the yaw rate electroniclly by the vibration change of plate fork inside the yaw rate senso ...

    Manual Transaxle. Repair procedures
    Removal 1. Remove the air duct(A). 2. Remove the engine cover(B). 3. Remove the air cleaner assembly(C). ...