Hyundai Sonata: Oil Pump Repair procedures - Lubrication System - Engine Mechanical SystemHyundai Sonata: Oil Pump Repair procedures

Removal and Installation
1.
Remove the timing chain cover.
(Refer to Timing System - "Timing Chain Cover")
2.
Remove the pump cover (A).

Tightening torque :
8.8 ~ 13.7N.m (0.9 ~ 1.4kgf.m, 6.5 ~ 10.1 lb-ft)

3.
Remove the inner rotor (B) and outer rotor (C).

4.
Install in the reverse order of removal.
    Oil Pump Components and Components Location
    Components 1.  Timing chain cover2.  Inner rotor3.  Outer rotor4.  Pump cover ...

    Oil Pressure Switch Repair procedures
    Removal and Installation 1. Remove the under cover. 2. Remove the oil drain plug, and drain the oil into a container. 3. Remove the oil pressure switch (A). Tightening torque : 7.8 ~ ...

    See also:

    Alternator Repair procedures
    Removal 1. Disconnect the battery negative terminal. 2. Loosen the mounting bolts (A) and then, turn the adjusting bolt (B) clockwise to loosen tension. 3. Remove the drive belt (A). 4. ...

    Closing the fuel filler lid
    1. To install the cap, turn it clockwise until it “click” one time. This indicates that the cap is securely tightened. 2. Close the fuel filler lid and push it in lightly making sure that it is ...

    Changing the coolant
    Have coolant changed by an authorized HYUNDAI dealer according to the Maintenance Schedule at the beginning of this section. CAUTION Put a thick cloth or fabric around the radiator cap before refi ...