Hyundai Sonata: Parking Assist Sensor Repair procedures - Rear Parking Assist System - Body Electrical SystemHyundai Sonata: Parking Assist Sensor Repair procedures

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front/rear bumper cover.
(Refer to Body - "Front Bumper Cover")
(Refer to Body - "Rear Bumper Cover")
3.
Disconnect the connector (B) from the parking assist sensor (A).

4.
Pull out the front sensor (A) by opening the sensor holder (B) out.

5.
Pull out the rear sensor (A) by opening the sensor holder (B) out.

Installation
1.
Install the rear ultra sensor after connecting the connector.
2.
Install the bumper cover.
3.
Connect the negative (-) battery terminal.
    See also:

    Front Oil Seal Components and Components Location
    Components 1. Front oil seal ...

    SRS Care
    The SRS is virtually maintenance-free and so there are no parts you can safely service by yourself. If the SRS air bag warning light "" does not illuminate, when you turn the ignition on ...

    Parking Brake Assembly. Components and Components Location
    Components (1) 1. Parking brake pedal 2. Parking brake cable 3. Equalizer assembly 4. Parking brake lever assembly Components (2) 1 ...